Key Features:
Supports each converter module media configured and monitored ability: Supports LFP(LLCF and LLR) function Supports port state enabled/disabled Supports auto-negotiation/forced mode Supports port speed and duplex mode Supports wire speed packet forwarding ability as below: 10Base-T : 14880 pps 100Base-TX: 148800 pps Supports module per port basic counters for traffic raw data monitor of fiber and TP port as below: Rx Packet Counter Rx Byte Counter Tx Packet Counter Tx Byte Counter Error Counter Collision Counter Tx Speed (bps) Rx Speed (bps) Supports RMON counters for port traffic quality monitoring function Supports bandwidth rating per port ingress and egress rate limit 100Mbps with 1Mbps granularity Supports max packet length: 1916 bytes Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports Supports comprehensive types of fiber with different distances and connections, including SC/ST/Bi-Di/LC and so on Supports one 10/100Base-T Fast Ethernet UTP port and one 100Base-FX Fast Ethernet Fiber port Supports Q-in-Q double tagged frame transparent Supports firmware upgrade by TFTP Supports converter mode (only block Pause frame 01-80-c2-00-00-01 and supported L2 protocol) Supports Module Information (S/N, MAC, Model Name) Supports per port basic LEDs for monitoring Supports media type, connector, wavelength and distance information Supports hot-swap and auto reload configuration ability Supports IEEE 802.1p Priority Supports IEEE 802.1q Tag VLAN Supports QOS Classification based on TOS Supports intelligent diagnostic for self detection Supports external loop back capability Supports web-based and text-based management user interface Supports SMTP Supports DHCP client Supports E-mail client (SMTP RFC 821) and Mobile Phone short message (SMS) for sending Traps and Alarm message Supports Dying Gasp function RoHS Compliance
Technical Specification:
Standards Compliance IEEE 802.3 10Base-T specification IEEE 802.3u 100Base-TX specification IEEE 802.3x full-duplex flow control specification 100Base-FX Fast Ethernet Fiber specification   Network Interface   10 /100Base-TX: - Connectors: RJ-45 - Auto-Negotiation - Auto-MDIX - Transmission: Full/Half-Duplex - Max. Cable Length: up to 100m 100Base-FX (Multi mode): - Connectors: SC / ST / LC - Transmission: Full/Half-Duplex - Max. Cable Length: 2Km for 62.5/125mm - Wavelength: 1310nm 100Base-FX (Single mode): - Connectors: SC / Bidi-SC / Bidi-SFF - Transmission: Full/Half-Duplex - Max. Cable Length: 100Km for 9/125¦Ìm - Wavelength: 1310nm or 1550nm   Emission and Safety Regulations   Complies with FCC Part 15 Class A & CE Mark Approval Warranty One Year Hardware 90-day Software
Power Requirement :  0.8A /+5VDC  Power Consumption:  4W  Ambient Temperature:  0 to 50C  Humidity :  5% to 90%  Dimensions :  140.7(L) X 90(W) X 30.6(H) mm
Typical Optical Power Budget:      Model Description Wavelength(nm) Transmit distance(KM) Transmit power(db) Sensitive degree (db) Satura- tion(db) Wastage(db) OPT-1100SC/M Multi  mode W/LLR/LLCF 1310 2KM -14 «-19 -30 -14 12.5 OPT-1100S25/M Single mode W/LLR/LLCF 1310 25KM -7 «-15 -34 -8 16 OPT-1100S40/M Single mode W/LLR/LLCF 1310 40KM -7 «-15 -34 -5 16 OPT-1100S60/M Single mode W/LLR/LLCF 1310 60KM -5 « 0 -38 -3 30 OPT-1100S80/M Single mode W/LLR/LLCF 1310 80KM -5 « 0 -38 -3 30 OPT-1100S100/M Single mode W/LLR/LLCF 1550 100KM -5 « 0 -38 -3 30 OPT-1100S120/M Single mode W/LLR/LLCF 1550 120KM -5 « 0 -38 -3 30